Vue complète
Articles similaires
Pâte antirouille multi-usages pour voiture, inhibiteur de rouille pour châssis, convertisseur, réparation et entretien des surfaces métalliques.
30,10€41,10€
Couleur : 100 g




Quantité :
Rapport
Inclure la violation du droit d'auteurLivraison standard gratuite. Voir les détails
Estimé entre Wed, Jul 22 et Sun, Jul 26
Vous pouvez retourner le produit dans les 30 jours suivant sa réception. Voir les détails
Achetez en toute confiance
Garantie de remboursement
Récupérez l'article que vous avez commandé ou soyez remboursé. Apprendre encore plus
À propos de cet article
Issu de OAAccessories
Le vendeur assume l'entière responsabilité de cette annonce.Numéro d'article: 38395382
Caractéristiques des articles
Description de l'article par le vendeur
100/200/300/500g Water-Based Metal Rust Remover for Car Chassis Rust Converter Metal Surface Clean Repair Protect Rust Remover Deruste
Specification:
Category: Automotive Rust Remover Primer
Ingredients: Rust remover
Size:Rust remover approx. 6.2 * 5.6cm Brush approx. 10cm
Net content: 100g / 200g / 300g / 500g
Shelf life: 3 years
Package includes:
1/2/3/5 Set * 100g Automotive Rust Remover Primer
Description:
Anti-rust primer, rust-free primer, car rust converter, metal refurbishment
It can make your car chassis rust free
Chassis Rust Remover removes existing rust and converts it into an inert coating that seals in moisture and prevents rust and corrosion on iron and metal surfaces
No more scraping, sandblasting or sanding! Just brush it on and wait!
This all-in-one surface conditioner and primer creates a protective black polymer barrier that is weatherproof and will give your car's undercarriage a fresh coat of black paint
A non-toxic, non-fuming formula, it is a non-flammable, low VOC, water-based treatment
Application:
1.Simply remove large rust and dirt particles with a wire brush or sandpaper before use
2.Removing dirt, dust and grease before using this product will be more effective
3.Shake or stir well before use and apply two coats with a brush, roller or pump sprayer with a minimum of 20 minutes drying time between coats.
4.Allow 48 hours curing time before applying high quality paint
Notes.
1.GENERAL: Do not use this product if the surface temperature is below 50°F.
2.Clean up: to remove should be washed immediately with soap and water
3.Storage: In a cool, dry place to prevent freezing or temperatures exceeding 100°F.
4.For long-term protection of iron surfaces, the cured rust inhibitor coating should be sealed with two coats of a high quality oil-based paint. No other primer is required.





Vidéos
Vidéos pour ce produit








