Croix en argent S925 avec épingle, chaîne en O polyvalente à faire soi-même, collier, bracelet, cheville, chaîne cœur, nouveau 1530

Usage: Pull the needle out of the small ball, then string the beads in. When wearing, simply insert the needle back into the small ball and hang it around your neck. The principle of operation is to pull the chain when you can. 0k Do not pull by the needle! Note: Although this chain is convenient for threading beads or pendants with small holes, it also carries certain operational risks. Improper handling or side force on the connection point between the chain and the needle may cause the needle to break. This is not a quality issue; you need to be cautious when handling it yourself. After stringing beads, try to use a clasp to remove the necklace or bracelet from your neck or wrist when opening it in the future. Another method is to remove the needle after operation and stick a half-hole bead onto the broken end. This method can also be used as a remedy for individual buyers who experience accidental needle breakage Quantity: 1 piece, Set of Bracelet, Necklace, and Anklet, Matched Set 925 Silver Cross Chain Plated with White Gold, Yellow Gold, and Rose Gold Bracelet Thin Style: The chain thickness is 0.9 millimeters, with an approximate length of 18cm millimeters. It is recommended to drill a hole with a diameter of at least 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when wearing Anklet Thin Style: The chain thickness is 0.9 millimeters, with an approximate length of 24cm millimeters. It is recommended to drill a hole larger than 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when worn Thin Necklace: The necklace is 0.9 millimeters thick and approximately 45cm millimeters long. It is recommended to drill a hole of at least 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when wearing Generally, the holes of pearls removed from necklaces are relatively small and cannot be directly strung through; these holes must be custom-sized. The difference from the 20 yuan style is that the 20 yuan chain has welded ear pins, and the adjustment ball is 4mm in size. This model's chain has pins made of welded silver wire, and the adjustment ball is 3mm in size.