Nouvelle lampe de camping solaire transfrontalière avec indicateur de charge, éclairage multifonctionnel extérieur pour tente, multi-sources

Model LY36 Light bulb LED main light white light + COB white light + COB warm yellow light Product size/net weight 13*7*7.6CM 201G Box size/gross weight 9*8.7*14CM 234G Material ABS+PC Switch Press the switch Battery Built-in 2000mAh 18650 battery Charging method Type-C USB charging supports output and can be charged by solar energy Charging time/battery life Charging time: 3H Battery life: 4-8H Gear position Sixth mode: Long press to activate both the main light and side light simultaneously - main light strong light - main light fast flashing - COB white light - COB warm yellow light - COB white light + warm yellow light Press again for 8 seconds to turn off Zoom mode None Waterproof rating IPX4 Lumen/Range 400-500LM 100-200M Features With hand strap, multiple light sources, output capability, digital display Indicator light Digital percentage LED power display. The LED number flashes when charging Color Orange Green The package contains Camping lamp + USB data cable + color box 100PCS 46.5x46.5x58CM 1. Instructions for use: 1. Check the battery: Ensure the battery has power and is installed in the correct direction in the flashlight; 2. When using a flashlight, choose the battery according to the flashlight's voltage and battery requirements; do not use the wrong battery to avoid damaging the circuit board. Do not use batteries of different models and voltages simultaneously 3. During use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent over-discharging of the battery and recharge it promptly. Pay attention to the battery's waterproof, moisture-proof, and drop-proof features. When charging, according to the charger's charging speed, remove the battery in time after the indicator light changes, and do not overcharge 4. Batteries that are not used for a long time should be fully charged and kept in that state. It is recommended to recharge and discharge them again approximately every three months to avoid chemical corrosion 5. Keep the inner wall of the lamp cup clean; absolutely do not wipe it with your hands or hard objects. To remove fingerprints from the lens, use a cotton swab dipped in lens cleaner and gently wipe it 6. Do not expose the flashlight to sunlight, water, chemicals, or corrosive gases for extended periods to avoid damage to the flashlight 7. Non-professionals should not disassemble the flashlight to avoid damaging the circuit board. 2. Precautions: 1. Do not shine light directly into the eyes to avoid causing damage to them 2. Please do not use it with excessive voltage; the voltage should not exceed 4.2V. Do not place the battery upside down, otherwise the circuit board will be damaged 3. When charging, please pay attention to the positive and negative poles of the charger and avoid overcharging or over-discharging the battery to prevent damage to its lifespan (charging time is generally 5-8 hours) 4. When using the flashlight, check that all the screws are tightly tightened and not loose, otherwise it may result in the flashlight not lighting up or only lighting up dimly 5. The flashlight should be kept away from sunlight or high-temperature environments. After stopping use, please remove the battery, charge it fully, and store it in a cool, dry place 6. The company's flashlight has the ability to withstand water splashes in daily life and will not cause problems under normal rain conditions, but it does not have the ability to be submerged in water. Please do not use this flashlight for diving or leave it in water basins or bathtubs for extended periods of time 7. To maintain the smooth rotation of the O-ring (sealing rubber ring) and threads, Please apply petroleum jelly or similar oil to its surface 2-3 times a year. 3. Charging instructions: Insufficient power should be replenished promptly to avoid affecting the battery's lifespan, and the battery should also be charged during long-term storage