Lunettes multifonctions transfrontalières New XTE avec éclairage, charge USB-C, témoin lumineux, compactes et portables, avec capteur et phares.

Model Number SY5865 Light bulb XTE+40*COB Product Dimensions/Net Weight 16*8*6CM 98G Box Size/Total Weight 19*10*7CM 189G Materials ABS Switch Double push switch (gear switch + sensor switch) Battery Built-in 800 mAh polymer battery Charging method Type-C USB Charging Charging Time/Battery Life Charging time: 5-6 hours Battery life: 3-4 hours Gear position Five levels: 40*COB strong light - 40*COB weak light - XTE strong light - XTE weak light - long press COB + XTE fast flash Any gear position can be detected except for the quick-change gear position Zoom Mode None Waterproof rating IPX4 Lumen/Range 350-500lm 50-100M Features Multifunctional Glasses Light Switchable Near and Far Light Inductive Indicator Light When charging, the red LED light stays on continuously, and when fully charged, the green light stays on continuously Color yellow blue The package contains Glasses lamp + USB cable + zipper pouch 60pcs 43.5*41.5*64.5C 12.5KG 1. Usage Instructions: 1. Check the battery: ensure it has power and is inserted correctly into the flashlight; 2. When using the flashlight, choose according to the flashlight's requirements for voltage and batteries. Do not use them randomly to prevent burning the circuit board. Do not use batteries of different models and voltages simultaneously 3. During use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent excessive discharge of the battery and recharge it promptly; pay attention to the battery's waterproof, moisture-proof, and shock-proof features. During charging, based on the charger's charging speed, when the indicator light changes, promptly remove it without overcharging 4. For batteries that won't be used for a long time, they should be fully charged and kept charged. Normally recharge and discharge them once every three months to avoid chemical corrosion 5. Keep the inner wall of the lamp cup clean and never wipe it with your hands or hard objects. To remove fingerprints from the lens, use a cotton swab dipped in lens cleaner to gently wipe it 6. Do not expose the flashlight to sunlight, water, chemicals, corrosive gases, etc. for a long time to avoid damage to the flashlight; 7. Non-professionals are not allowed to disassemble the flashlight to prevent damage to the circuit board. Second, precautions: 1. Do not shine light directly into your eyes to avoid causing damage; 2. Do not use it under overvoltage, the voltage should not exceed 4.2V, and do not reverse the battery; otherwise, it will burn out the circuit board 3. When charging, please make sure to align the charger's positive and negative terminals correctly and avoid overcharging or overdischarging the battery to prevent damage to its lifespan (charging time is generally 5-8 hours) 4. When using the flashlight, check that all threads are tightened and not loose, otherwise it may cause the product to not light up or only glow slightly 5. The flashlight should be kept away from sunlight or high temperatures. After stopping use, please remove the battery, fully charge it, and store it in a cool and dry place 6. The company's flashlight has waterproof capabilities for daily use and generally won't have issues in rain. However, it does not have diving functionality. Please do not take this flashlight diving or leave it in a basin or bathtub for extended periods 7. To keep the O-ring (sealing rubber ring) and threads rotating smoothly, please apply petroleum jelly oil on their surface 2-3 times a year. 3. Charging instructions: Deficiencies should be promptly replenished to avoid affecting battery life. During long-term storage, the battery should also be charged