Fontaine à eau pour chat avec détecteur de mouvement PIR en forme de patte, compatible avec tous les distributeurs d'eau automatiques pour animaux de compagnie et interface USB.

Smart Infrared Radar Sensor How the motion sensor works? After using the motion sensor, your pet's movement can be detected within the detection range. Range of detection is approximately 3 m and cone angle of 120° . Therefore, when your pet is approaching or moving, the water dispenser will operate automatically. To advoide using electricity all the time, its extended time range about 15s. The water dispenser will stop working after the animal has left the detection range for 15 seconds. Energy saving! Moreover, using a sensor could increase the fun of drinking water, attract pets to drink more water. PIR Motion Sensor Switch for Pet Fountains Extend the fountain's life with this sensor switch. Range of detection: approximately 3 m Induction angle: cone angle of 120° Power Input: 5V1A [Trigger Mode]Passive Form & Timed Form. Passive Form: it detects that an object is approaching or moving, and the water dispenser will operate automatically. Energy saving. Timed Form: If no object is detected, the fountain will run 4 times a day automatically, in order to keep the water clean. [High Stability]About 3m detection distance. Extended time range: 15s. The fountain will stop working after the animal has left the detection range for 30 seconds. [Small Size and Easy to Install]Simply USB port connection. Accessories include a suction cap, a sticker and a detachable connector(move at will). You can choose the appropriate installation method according to your needs. [USB Socket] USB jack wiring method for easy connection. The total cable length is 1.5m. Instructions: 1. Insert the USB plug of the fountain pump into the USB input port of the sensor. Then insert the USB plug of the sensor into the adapter. 2. Stick the sensor to the position to be installed.