Vue complète
Articles similaires
Lustre moderne à LED pour salon, table à manger, plafond, cuisine, suspension, intensité variable, intérieur
48,85€67,22€
Couleur de l'abat-jour : Têtes d'or à 3 faces






Taille : Pas de télécommande
Pas de télécommande
Avec télécommande
Quantité :
Rapport
Inclure la violation du droit d'auteurLivraison standard gratuite. Voir les détails
Estimé entre Wed, Jul 1 et Sat, Jul 4
Vous pouvez retourner le produit dans les 30 jours suivant sa réception. Voir les détails
Achetez en toute confiance
Garantie de remboursement
Récupérez l'article que vous avez commandé ou soyez remboursé. Apprendre encore plus
À propos de cet article
Issu de Home decoration mall
Le vendeur assume l'entière responsabilité de cette annonce.Numéro d'article: 38001639
Caractéristiques des articles
Description de l'article par le vendeur
No Remote (3-Color Changeable):
Switch between warm light, cool light, and neutral light. This model will be only controlled with the switch(by others) on the wall. When you turn off the lamp and turn it back on, the color temperature of the lamp will change. The remote controller or phone APP isn't available because the driver does not support it.
With Remote (3-Color Dimmable):
Not only adjust the color temperature but also the brightness. This model will be controlled with the switch(by others) on the wall, a remote controller, or a phone APP.
Product Specification:
Item Type: Smart LED Pendant Light
Material: Hardware, Acrylic
Technics: Brushed Plating/Paint
Light Source: LED Chip
Size: As Picture
Height: 1.5m Adjustable
Color Temperature: 2700K-6500K
Voltage: AC 110-265V 50/60Hz
Wattage: 21W/35W/42W
Is Smart Device: YES
Is Dimmable: YES
Control Principle: 2.4GHz WIFI+Bluetooth+2.4GHz remote control
APP Software Type: Smart Light Control
Mobile Version: Android 4.4/IOS9.0 above
Control Method: APP Control/Remote Control
Application: Dining Room, Bar, Study, Office
Package Included:
Smart LED Pendant Light 1pcs
Installation Instruction
Note:
The remote controller shall be powered by 2pcs 1.5V AAA batteries, which are not included in the package. You need to buy them in the local store.
The phone APP and remote controller need to be matched with the driver before they can be used.
The matching method of the remote controller is as follows: Turn on the power, and press the SETUP key within 10s. The light flashes indicate the matching is completed.
The matching method of the phone APP is as follows: Turn on the phone's Bluetooth and the lamp's power, and then press the Paircode icon within 10s. The light flashes indicate the matching is completed.
If the above doesn't work, you need to turn off the total power supply of the lamp and then repeat the above operation until the light flashes, and the alignment is successful.













Vidéos
Vidéos pour ce produit







