Vue complète
Articles similaires
MEIAN 4pcs Capteur de fuite d'eau Détecteur de fuite d'eau WIFI Zigbee App Surveillance à distance Prise en charge d'alarme de sécurité pour maison intelligente
654 vendu
64,19€84,35€
Couleur : Capteur de fuite d'eau
Quantité :
Rapport
Inclure la violation du droit d'auteurLivraison standard gratuite. Voir les détails
Estimé entre Sat, Nov 1 et Wed, Nov 5
Vous pouvez retourner le produit dans les 30 jours suivant sa réception. Voir les détails
Achetez en toute confiance
Garantie de remboursement
Récupérez l'article que vous avez commandé ou soyez remboursé. Apprendre encore plus
À propos de cet article
Le vendeur assume l'entière responsabilité de cette annonce.Numéro d'article: 28153926
Caractéristiques des articles
Description de l'article par le vendeur
ZigBee Gateway Hub is Required
ZigBee Gateway Hub
is Required
Water Detector needs to use ZigBee gateway to
connect to APP and push information
Working Principle
Receive Alerts When
it Detects oding
Leak Detected
Real Time Alert and Notification
APP Remote Control
APP Remote Control
Connected to the network via
wifi, remote control at any time
Connect to Multiple Sensors Everywhere
Connect to Multiple
Sensors Everywhere
Applicable to various places according to your needs
Product Brief
The SW02-ZB water immersion detector transmits information
through a wireless transponder according to the impedance
change of the detection electrode after being immersed in
water.
Indicator Light Description
Power on-the green light is always on for 3 secondsDistribution network-green light flashes quickly Working mode-the indicator light is off Data reporting-red light flashes once
Reset the network
Press and hold the network configuration button for 5 S and
the green indicator will flash quickly, the device will exit the
network and enter the network configuration mode again,
APP Download and Use
Users please scan the following QR code or download and install
the Tuya Smart APP in the mobile application market, and
register for use after the installation is complete.
Network Preparation
◆The water immersion detector has been installed withbatteries.
◆The smart gateway has been added to the APP.
◆The mobile phone and the gateway access the same WiFi.
◆Mobile phones, sub-devices and gateways are within the effective range of the Zigbee network.
Network access settings
a. Open the home page of the APP, select the gateway, and click Add sub-device at the bottom of the page.
b. Long press the network configuration button for more than 5 seconds, the green indicator light flashes quickly.
c. Click Indicator is flashing fast and operate the sub-device to access the network according to the prompt.
d. After the addition is complete, the device can be found in the My Home list.
IP67 Waterproond Dustproof
IP 67 Waterproond Dustproof Prevent electric leakage and ensure safer use
High Sensitivity
High Sensitivity Water rising to the preset level alarming
Real-time Detection
Real-time Detection
When water immersion is detected, the detector will send an alarm signal to the users mobile phone
No Installation Required
No Installation Required Place it flat where you need to be waterproof









Vidéos
Vidéos pour ce produit