MSHARE 50g Gel acrylique scintillant pour extensions d'ongles, gel dur pour modelage et construction d'ongles, professionnel

Professional salon quality hard poly acrylic gel Very dense easy to shape also with dualform. Very resistant after cure in uv lamp. perfect for create long and very thins enhancements. How to use acrylic gel 1.Use the nail file to rub the nail surface and then clean your nail; 2.Apply a thin layer of the base gel,curing with led or uv lamp 30-60s; 3.Select a suitable nail tips to apply poly gel in it,use nail brush pen with slip solution to make the gel smooth; 4.put it to your nail,curing with led or uv lamp 30-60s; 5.Peel off the nail tips,trim the shape and polish your nails; 6.apply a thin layer of no wipe top coat ,curing with led or uv lamp 30-60s; Here are the steps to remove acrylic gel: 1. Acetone 2. Nail buffer 3. Aluminum foil 4. Cotton balls or pads 5. Cuticle pusher Here are the steps to remove acrylic gel: 1. Use a nail buffer to rough up the surface of the acrylic gel. 2. Cut small pieces of aluminum foil and soak cotton balls or pads in acetone. 3. Place the soaked cotton ball or pad onto the nail, covering the acrylic gel. 4. Wrap the foil tightly around the cotton ball or pad and leave it on for 5. 10 to 15 minutes. Repeat this process on all nails. 6. After 10 to 15 minutes, remove the foil and cotton ball or pad from the nail. 7.Use a cuticle pusher to gently push off the softened acrylic gel. If there is any remaining acrylic gel, repeat the process until all the acrylic gel is removed. Once all the acrylic gel is removed, wash your hands and moisturize your nails. Note: Acetone can be drying to the skin, so be sure to moisturize your hands and nails after removing the acrylic gel. Also, if you experience any irritation or discomfort during the removal process, stop immediately and consult a professional.