Chargeur de base magnétique pour poignée de lunettes Oculus Quest 2 VR avec ensemble de batteries Accessoires de chargement de base VR

Packing list Charging stand X1 battery X2 Battery cover X2 USB Type C magnetic head X4 Magnetic head removal pin X1 1.2m charging line X1 User Manual X1 1. When the charging base charges the VR helmet and two handles at the same time, in order to provide sufficient current, the charging base must be equipped with a charger with an output of more than 5V2A. The required charger output: 5V>2A 2. The original charger provided in the package of 0clusQuest2 can be used for this charging stand Steps of helmet charging 1. Connect the charger above 5V2A to the charging stand (the charger is not included in this package, and the customer needs to purchase it separately). The green light of the charging stand will be on, and the charging stand will enter the power on standby state 2. Install the Type-c magnetic suction head into the charging hole of the helmet 3. Put the helmet vertically into the corresponding charging position of the charging seat, The LED indicator of the seat charger turns yellow Procedure for charging the handle 1. Connect the charger above 5V2A to the charging stand (the charger is not included in this package and customers need to purchase it separately). The charging stand will turn on the green light and enter the power on standby state 2. Slide the battery cover of the handle down and take out the battery cover 3. When installing the battery for the handle, please make the Type-C charging port of the battery face up as far as possible 4. Install the battery cover provided in this package on the handle 5. Use the needle provided in this package to adjust the Type-C charging port of the battery to align with the hole of the battery cover 6. Insert the magnetic pickup into the Type-C charging port of the battery through the hole of the battery cover 7. Put the handle into the corresponding charging position of the charging base to let the magnetic suction head contact and charge At the beginning, the LED indicator of the seat charger turns yellow (please note that there are left and right handles. Please place the handles according to the "L" and "R" marks on the seat charger) If you want to take out the magnetic head of the handle, please use the needle provided in the package to pick out the magnetic head