Contrôleur solaire MPPT 100A 60A 50A 40A 30A Double USB Écran LCD 12V 24V Chargeur de panneau de cellules solaires Régulateur avec charge

Solar Solar Controller MPPT 100A 60A 50A 40A 30A Dual USB LCD Display 12V 24V Solar Cell Panel Charger Regulator with Load Function: 1. Always keep the battery on fill voltage condition. 2. Prevent the battery from over-charging. 3. Prevent the battery from over-discharging. 4. Prevent the battery from reverse charging to solar panels during nights. 5. Reverse Polarity Protection for Battery 6. Reverse Polarity Protection for Solar Panels 7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working. 8. Thunder protection 9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.) 10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature. Features: 1. Industrial-grade master chip, 16 AD sampling accuracy, temperature, charging current, discharge current accurate real-time display, power generation at a glance. 2. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking. 3. Large-screen LCD display, adjustable charging and discharging parameters. UItra-wide charge and discharge adjustable, as long as you understand the characteristics of the battery set its corresponding charging parameters, you can charge a battery. When the output is off, the time can be adjusted, which is more convenient. (on the market, there is no point adjustment) 4. Acomplete three-phase charge management, effectively protect the battery, the battery is more durable. 5. Built-in overheating, overcurrent short circuit, open circuit protection, reverse connection protection,when the fault is eliminated, the controller automatically recovers, does not damage the device. 6. Bidirectional MoS tube anti-backflow circuit, high-power charging mode, ultra-low heat. 7. R5. 0 solar charging DC plug, R5. 0 DC lamp output DC plug, convenient connection. Specifications 1. Rated voltage: 12/24V 2. Rated current: 30/40/50/60/100A 3. Max. PV voltage: 50V 4. Max. PV input power: 1200W(12V) / 1200W(24V) Package Includes： 1 x Solar Panels Battery Charge Controller 1 x User Manual